70
1 – ALARM MODE – CUMULATIVE
Counter cumulates the amount of time the input has been at its active level. (The reset options are listed below).
2 – MAXIMUM ACTIVITY TIME
Total amount of active time that must be reached by the counter before the Timer is turned on. A time value of 0 to
9999 minutes can be set. Default setting is 0, for which no automatic action will happen.
3 – LOG DAILY ACTIVE TIME
Log the daily active time in the System Log.
4 – RESET COUNTER
Manual counter reset.
5 – RESET AT MIDNIGHT
Reset counter at midnight every day.
6 – RESET TRIGGER
Operand-based automatic reset. Reset can be generated automatically by any input ID in the Cortex.
7 – LAST RESET
Date and time at which the last reset occurred.
8 – REFRESH / READ
Refresh / read the screen content.
9 – STATUS INPUT
Bring the Status input configuration menu screen.
10 – SAVE / WRITE
Save the screen content.
11 – EXIT
Exit menu
To Next Page
Loading...