S5750E Series
Installation Guide
Chapter 1 Introduction
1-1
Chapter 1 Introduction
1.1 Overview
S5750E-52X-P-SI(R2.0) ethernet switches is a series of three layer line spee
d Ethernet switch products by self-development in DC YunKe Networks Co.,Ltd. ,i
ntelligent network management switch used by the network environment which ne
eds the high performance, the bigger port density and the convenient installation.
1.2 Introduction to Product
1.2.1 Product Overview
The S5750E-52X-P-SI(R2.0) switch is capable of providing a 740W PoE pow
er supply and a maximum power output of 30W per port. The switch consists of
48 1Gb optical ports and 4 10Gb optical ports.
1.2.2 Features and Benefits
Various Interfaces
S5750E-52X-P-SI(R2.0) supplies 48 copper ports and 4 10Gb optical ports.
Support 10Gb Ethernet
10Gb Ethernet which adopts full-duplex technology instead of low-speed,
half-duplex CSMA/CD protocol, is a big leap in the evolution of Ethernet. 10Gb Ethernet
can be deployed in star or ring topologies. This series of switches provide broad
bandwidth and powerful processing capacity. It is suitable for metropolitan networks and
wide area networks. It can simplify network structures and reduce cost of network
construction.
Networking Protocols
This series of switches support 802.1d/w/s, 802.1Q, 02.1p, 802.3ad, 802.3x,
GVRP, DHCP and SNTP etc. The switches also support the multicast protocols s
uch as IGMP, DVMRP and PIM. Moreover, This series of switches support RIPv1
/2, OSPF, BGP and IPv6 protocols(Including RIPng, OSPFv3, BGP4 + routing pr
otocols and MLD, PIMv6 and other multicast protocols). All these protocols suppo
rted enable switch to meet the requirements of complex network constructions.
ACL
To Next Page
Loading...
Need help?
General
