DCS Delius - Setting the Output Level

dCS Delius User Manual Manual for Software Issue 2.3x
dCS Ltd September 2004
Manual filename: Delius Manual v2.3x.doc Page 13 email: more@dcsltd.co.uk
English version web-site: www.dcsltd.co.uk
Step 3 - Setting the Output Level
If the preamplifier volume setting for a comfortable listening level is too high or
too low, you may need to change the Output Level setting. Similarly, if you are
driving a power amplifier directly and Delius Volume setting for a comfortable
listening level is higher than –10.0 or lower than –20.0 try changing the Output
Level setting.
IMPORTANT! Do not play music at a high level while changing the Output Level setting.
do this: Press the Function button once, then press the Mute button repeatedly until
the display shows Out:2V or Out:6V. If the Volume setting is too high, press
the Select button to change to Out:2V. If the Volume setting is too low, press
the
Select button to change to Out:6V.