dCS Delius User Manual Manual for Software Issue 2.3x
dCS Ltd September 2004
Manual filename: Delius Manual v2.3x.doc Page 57 email: more@dcsltd.co.uk
English version web-site: www.dcsltd.co.uk
Mains Voltage Setting
Before connecting the power cable to your Delius for the first time, please check
that it has been set to the correct operating voltage for your local mains supply.
50Hz or 60Hz operation is not important – the unit can use either. The unit's
present voltage setting is shown on the label beneath the mains inlet on the rear
panel. If this does not match your local supply voltage, DO NOT attempt to use
the unit. Contact your dealer to arrange to have the unit reset. Using the Delius
with the wrong mains setting for your local supply may result in serious damage
to the unit and will invalidate the warranty. DO NOT attempt to reset the unit
yourself.
IMPORTANT! Please use a sensible power cable, such as the one supplied with the unit.
Some audiophile power cables presently available are excessively heavy,
their weight can damage the power inlet connector. Such damage is not
covered by the warranty.
Positioning the Unit
Place Delius on a firm, vibration free base so as to allow convenient connection
to your digital source. We suggest that you avoid siting Delius either directly
above or below preamplifiers or tuners, if either of these will be used in your
system at the same time as Delius.
To Next Page
Loading...
