Need help?Do you have a question about the DCS LINA and is the answer not in the manual?
General| Type | DAC |
|---|---|
| Digital Inputs | AES/EBU, S/PDIF, USB, Ethernet |
| Analogue Outputs | XLR, RCA |
| Sample Rates | DSD64 to DSD256 |
| Ports | AES/EBU, S/PDIF, USB, Ethernet, XLR, RCA |
| DAC Architecture | dCS Ring DAC™ APEX |
Lists the items included in the packaging for the LINA Network DAC.
Provides guidance on optimal placement for best sound quality and ventilation.
Suggests appropriate cables and connectors for connecting the unit.
Details the controls and display on the front of the LINA Network DAC.
Identifies and describes the various input/output connectors on the rear.
Explains the meaning of various icons displayed on the unit.
Instructions on how to connect the LINA Network DAC to the power source.
Procedures for powering the unit on, switching it off, and using sleep mode.
Details how to put the unit into and out of sleep mode to conserve power.
Guides on connecting the DAC with other LINA components (Master Clock, Amplifier).
Explains how to connect external digital audio sources like CD transports.
Instructions for connecting the DAC to amplification systems.
Steps to connect the DAC to a local network for streaming.
How to connect a PC or Mac via USB for audio playback.
Explains clocking and its importance for minimizing jitter in digital audio.
Details how to link multiple LINA units for synchronized power control.
How to select different audio inputs available on the DAC.
Instructions for streaming audio wirelessly from Apple devices.
Guide to using Spotify Connect for music playback.
Overview of streaming from services like Spotify, TIDAL, etc., via Mosaic.
Information about MQA audio format and the DAC's decoding capabilities.
How to use the LINA Network DAC with Roon for music playback.
Instructions for playing music files directly from a USB drive.
Explains how to navigate the unit's on-screen menu system.
Provides a summary table of available menus and settings.
How to customize the function of the shortcut buttons.
Adjusting the crossfeed parameter for headphone listening.
Selecting digital filters for PCM audio processing.
Selecting digital filters for DSD audio processing.
Selecting between DSD and DXD upsampling modes.
Adjusting the phase of the analogue audio signal.
Configuring how the unit synchronizes its clock with the audio source.
Configuring the Dual AES digital input mode.
Selecting between Class 1 and Class 2 for USB audio connections.
Adjusting the audio buffer for sync with video or to reduce clicks.
Controls whether the unit's display remains on or turns off.
Adjusting the brightness level of the unit's display.
Restores all settings to their original factory defaults.
Performs a test to check for incorrect audio channel connections.
Runs a procedure to condition the unit's components.
Displays unit status, serial number, software version, and IP address.
Instructions for updating the LINA Network DAC's firmware.
Step-by-step guide to replacing the internal mains fuse.
Instructions on how to clean the exterior of the unit safely.
Details the warranty period, terms, and registration process.
Lists conditions that will void the product warranty.
How to contact support and arrange for repairs or service.
Specifies the recommended environmental and electrical operating parameters.
Explains the markings and information found on the product label.
Details the device's compliance with FCC regulations for digital devices.
States compliance with relevant European Union directives.
Compliance statement for Korean regulatory standards.
Certification for compatibility with Apple devices.
Indicates compatibility with Apple AirPlay technology.
To Next Page
