DCS LINA - Obtaining Service; Operating Conditions

Obtaining service
Should you encounter a problem, contact your fulfilment centre or authorised service centre
for help, quoting the model, the serial number, the software version (where appropriate) and
giving a detailed description of the fault. Your contact will advise you fully on actions that
need to be taken. When returning a unit, the original packaging should be used to avoid
transit damage. Replacement packaging sets may be purchased from dCS.
Operating conditions
• The supply voltage must remain within +/-10% of the A.C. voltage specified on the
back panel.
• The supply frequency must be in the range 49Hz to 62Hz.
• Ambient temperature range: 0°C (32°F) to 45°C (113°F), non-condensing.
• Do not install the unit near heat sources such as radiators, air ducts, power amplifiers
or direct strong sunlight.
Limited warranty
LINA Network DAC User Guide
47