D – Shipping and Storage
April, 2018 D-2 INM.XX.X.00
Storage
Protection from the elements is required for any equipment that will be stored on a job site or holding area
before installation.
For long-term storage, a controlled indoor environment is highly recommended.
All factory-applied shipping protection should be removed before the equipment is put into storage. Shipping
protection material is provided by the factory for shipping only – it is not a suitable protection for short or
long-term storage.
If long-term storage is required, warranty aspect should be considered. Refer to the Warranty section of
Operation and Maintenance Manual for more details. Please contact Dectron if you have any questions.