STEALTH1
3
1. Imitation Motion Sensor
2. Pinhole Camera: The pinhole camera is located in this small hole
3. Power Switch: To switch o the power, always press the STOP button rst to stop recording,
then switch o the device
4. SD Card Slot: Supports SD and SD-HC memory cards
5. Video Output Jack (RCA): To view footage, use the RCA video output to connect to your television.
Connection to a tv is NOT required for recording.
6. Power Input: Connect power cord to device here
7. Full Stop/Overwrite Switch: Select whether to overwrite the recorded SD card or stop recording
completely when the card is full. When you select “Overwrite”, the oldest
stored video will be recorded over rst.
8. NTSC/PAL Switch: NTSC is the video system used in North America. PAL is used in Europe and
parts of Asia.
9. Menu Button: Opens and exits the menu
10. Record & Stop Button: Starts and stops recording
11. Play & Pause button Play and pause playback of recorded footage
12. Reverse & Forward Buttons: Allows you to navigate through the menu options, and reverses and
forwards through footage
13. Mounting Hole : Attach the mounting bracket here
14. Flush Wall Mount Holes: Allows you to mount the camera directly onto the wall
15. Battery Compartment: Camera can be battery powered so the system is completely wireless
Note: If changes are made to NTSC/PAL or Stop/Overwrite functions, you must shut o and restart the
unit before the changes can take eect.
1
2
3 4
5
6
7
8
9
10
11
13
14
12
15
BUTTONS AND CONNECTIONS
To Next Page
Loading...
Need help?
General
Weight and Dimensions
