Deger D25H - Fault Message

01.01.2022 ASSEMBLY AND OPERATING MANUAL DEGER D25H, D60H, D80 and D100 Page 39
13.4 Fault message
DEGER system D25H
DEGER system D60H
DEGER system D80
DEGER system D100
Delivery date
Serial-No. of DEGER system
Serial-No. EC-6
Serial-No. EMO
Individual system
Park with …… systems
Wind monitor type
CCB BASIC CCB STANDARD
.
free standing building integrated
Measuring values as per
troubleshooting plan
Yes
no
East-West axis rotates to the brightest spot (possibly cover a sensor cell)
East-West drive can be moved with joystick (CCB) to both directions
Elevation axis rotates to the brightest spot (possibly cover a sensor cell)
Elevation drive can be moved with joystick (CCB) to both directions
Control via wind monitor: moves to horizontal position
Measuring values on energy converter
Voltage input
Terminal L-N
V
LED MOTOR POWER OK
LED green
LED off
LED SENSOR POWER OK
LED green
LED off
LED EL MOTOR
Terminal 1-2
LED green
LED red
LED AZ MOTOR
Terminal 3-4
LED green
LED red
LED EL SENS OUT
Terminal 11-12
LED green
LED red
LED AZ SENS OUT
Terminal 13-14
LED green
LED red
Signal on SAVE POS.?
Terminal 20-21
+ or -
V
Signal on external EL?
Terminal 16-17
+ or -
V
Signal on external AZ?
Terminal 18-19
+ or -
V
Current consumption elevation motor
+ or -
A
Current consumption azimuth motor (East-West)
A
Jumper settings
J1 J2 J3 J4 J5 J6 J7
Contact
Installer Operator
Company / Name
Address
Post code/Place
Contact > Phone number, e-mail address
Delivery Address
for returning parts:
DEGERenergie GmbH & Co. KG
Service
Industriestr. 70
D-72160 Horb a.N.
Germany
Problem description
Spare parts requirement: