● Mounting
● Some technical specifications
● Data sheet
● Description, features, functions and approvals
● Layout and dimensions
● Terminals and wiring diagram
● Technical specifications
● Designer's handbook
● Description of functions and sequences
● Parameters
● Utility software
● Installation and commissioning instructions
● Tools required
● Mounting the controller
● Terminals and wiring diagram
● Parameters
● Sequence for commissioning
● Commissioning using the utility software
● Commissioning using the front panel
● Technical support
● Operator's manual
● Basic operator tasks
● Front panel
● Parameters
● Utility software
● Technical support
Glossaries are included in the Designer's handbook, the Installation and commissioning instructions
and the Operator's manual.
1.2 Warnings, safety and legal information
1.2.1 Warnings and notes
A number of warnings and notes are included in this document. These are highlighted, to separate them from
the general text.
Warnings indicate potentially dangerous situations. If the guidelines are not followed, these sit-
uations could result in death, personal injury or damaged equipment.
Notes provide general, helpful information.
1.2.2 Safety issues
Installing and operating the unit may require work with dangerous currents and voltages. The installation must
only be carried out by authorised personnel who understand the risks involved in working with live electrical
equipment.
Hazardous live currents and voltages. Do not touch any terminals, especially the AC measure-
ment inputs. Touching the terminals could lead to injury or death.
CGC 200 installation and commissioning
instructions 4189340806 UK
Introduction
DEIF A/S Page 4 of 32
To Next Page
Loading...
