Table 3 C-Series hardware components (continued)
Component Description
l
Optional two three-phase WYE or delta PDUs in a 2U
configuration with two power drops
l
Front and rear doors
l
Racking by Dell EMC manufacturing
Private switch One or two 1 GbE switches. The second switch is required for
configurations with more than six servers.
Public switch Two or four 10 GbE switches. The third and fourth switches
are required for configurations with more than six servers.
Nodes Intel-based unstructured servers in 8- through 48-node
configurations. Each server chassis contains four nodes
(blades).
Disks The C-Series has 12 3.5-inch disk drives integrated with each
server. Gen1 hardware uses 6 TB disks. Gen2 hardware uses 8
TB disks.
Service tray 50-lb capacity service tray
Hardware Components and Configurations
14 D- and U-Series Hardware Guide