ECS Appliance servers
Provides a quick reference of servers.
ECS has the following server types:
l
D-Series Gen2 Rinjin-16 for Object and HDFS (October 2016)
l
U-Series Gen2 Rinjin-16 for Object and HDFS (November 2015)
l
U-Series Gen1 Phoenix-16 for Object and HDFS (June 2014)
l
C-Series Gen2 Rinjin-12 for Object and HDFS (February 2016)
l
C-Series Gen1 Phoenix-12 for Object and HDFS (March 2015)
D-Series
D-Series Rinjin-16 nodes have the following standard features:
l
Four-node servers (2U) with two CPUs per node
l
2.4 GHz six-core Haswell CPUs
l
Eight 8 GB DDR4 RDIMMs
l
One system disk per node (400 GB SSD)
l
LED indicators for each node
l
Dual hot-swap chassis power supplies
l
One high density SAS cable with one connector
U-Series
U-Series Gen2 Rinjin-16 nodes have the following standard features:
l
Four-node servers (2U) with two CPUs per node
l
2.4 GHz six-core Haswell CPUs
l
Eight 8 GB DDR4 RDIMMs
l
One system disk per node (400GB SSD)
l
LED indicators for each node
l
Dual hot-swap chassis power supplies
l
One SAS adapter with two SAS ports per node
U-Series Gen1 Phoenix-16 nodes have the following standard features:
l
Four-node servers (2U) with two CPUs per node
l
2.4 GHz four-core Ivy Bridge CPUs
l
Four channels of native DDR3 (1333) memory
l
One system disk per node (either a 200 GB or 400 GB SSD)
l
LED indicators for each node
l
Dual hot-swap chassis power supplies
l
One SAS adapter with one SAS port per node
C-Series
C-Series Gen2 Rinjin-12 nodes have the following standard features:
l
Four-node servers (2U) with two CPUs per node
l
2.4 GHz six-core Haswell CPUs
Servers
26 D- and U-Series Hardware Guide
To Next Page
Loading...
Need help?
General