Dell EMC PowerEdge R620 - System Diagnostics Controls

CAUTION: Use the embedded system diagnostics to test only your system. Using this program with other systems may cause
invalid results or error messages.
1 As the system boots, press F11.
2
Use the up and down arrow keys to select System Utilities > Launch Dell Diagnostics.
The ePSA Pre-boot System Assessment window is displayed, listing all devices detected in the system. The diagnostics starts
running the tests on all the detected devices.
System diagnostics controls
Menu Description
Conguration Displays the conguration and status of all detected devices.
Results Displays the results of all tests that are executed.
System health Provides the current overview of the system performance.
Event log Displays a time-stamped log of the results of all tests run on the system. This is displayed if at least one event
description is recorded.
106 Using system diagnostics