Dell EMC PowerEdge R620 - Jumpers and Connectors; System Board Jumper Settings

Jumpers and connectors
Topics:
• System board jumper settings
• System board connectors
• Disabling forgotten password
System board jumper settings
For information on resetting the password jumper to disable a password, see Disabling A Forgotten Password.
Table 9. System Board Jumper Settings
Jumper Setting Description
PWRD_EN
(default)
The password feature is enabled (pins 4–6).
The password feature is disabled (pins 2–4). iDRAC local access is
unlocked at the next AC power cycle.
NVRAM_CLR
(default)
The conguration settings are retained at system boot (pins 1–3).
The conguration settings are cleared at the next system boot (pins
3–5).
6
Jumpers and connectors 107