Dell EMC PowerEdge R620 - Page 117

NOTE: If you receive a system message not listed here, check the documentation of the application that was running when the
message was displayed or the operating system's documentation for an explanation of the message and recommended action.
NOTE: In some messages, a particular system component is identied by name (“<name>”) component number (“<number>”),
or location (“bay”).
Error Code Message Information
AMP0302
Message The system board <name> current is greater than the upper warning threshold.
Details System board <name> current is outside of the optimum range.
Action
1 Review system power policy.
2 Check system logs for power related failures.
3 Review system conguration changes.
4 If the issue persists, see Getting Help.
AMP0303
Message The system board <name> current is greater than the upper critical threshold.
LCD Message System board <name> current is outside of range.
Details System board <name> current is outside of the optimum range.
Action
1 Review system power policy.
2 Check system logs for power related failures.
3 Review system conguration changes.
4 If the issue persists, see Getting Help.
ASR0000
Message The watchdog timer expired.
Details The operating system or an application failed to communicate within the time-out period.
Action Check the operating system, application, hardware, and system event log for exception
events.
ASR0001
Message The watchdog timer reset the system.
Details The operating system or an application failed to communicate within the time-out
period. The system was reset.
Action Check the operating system, application, hardware, and system event log for exception
events.
ASR0002
Message The watchdog timer powered o the system.
Details The operating system or an application failed to communicate within the time-out
period. The system was shut down.
Action Check the operating system, application, hardware, and system event log for exception
events.
ASR0003
Message The watchdog timer power cycled the system.
System messages 117