Error Code Message Information
LCD Message CPU <number> is absent. Check CPU.
Action Verify processor installation. If present, re-seat the processor.
CPU0204
Message CPU <number> <name> voltage is outside of range.
LCD Message CPU <number> <name> voltage is outside of range. Re-seat CPU.
Details Voltages outside the allowable range may damage electrical components or may cause
the system to shutdown.
Action
1 Turn o the system and remove input power for one minute.
2 Ensure the processor is seated correctly.
3 Reapply input power and turn on the system.
4 If the issue persists, see Getting Help.
CPU0700
Message CPU <number> initialization error detected.
LCD Message CPU <number> initialization error detected. Power cycle system.
Details System BIOS was unable to initialize the processor.
Action
1 Turn o the system and remove input power for one minute.
2 Ensure the processor is seated correctly.
3 Reapply input power and turn on the system.
4 If the issue persists, see Getting Help.
CPU0701
Message CPU <number> protocol error detected.
LCD Message CPU <number> protocol error detected. Power cycle system.
Details System event log and operating system logs may indicate that the exception is external to
the processor.
Action
1 Check system and operating system logs for exceptions. If no exceptions are found,
continue.
2 Turn o the system and remove input power for one minute.
3 Ensure the processor is seated correctly.
4 Reapply input power and turn on the system.
5 If the issue persists, see Getting Help.
CPU0702
Message CPU bus parity error detected.
LCD Message CPU bus parity error detected. Power cycle system.
Details System event log and operating system logs may indicate that the exception is external to
the processor.
Action
1 Check system and operating system logs for exceptions. If no exceptions are found,
continue.
System messages 119
To Next Page
Loading...
