Figure 35. Removing and installing the heat sink
1
heat sink 2 retention sockets (2)
3 retention screws (2) 4 processor
CAUTION: The processor is held in its socket under strong pressure. Be aware that the release lever can spring up suddenly
if not rmly grasped.
8 Position your thumb rmly over the processor socket-release lever near the unlock icon and release the lever from the locked
position by pushing down and out from under the tab.
9 Similarly, position your thumb rmly over the processor socket-release lever near the lock icon and release the lever from the
locked position by pushing down and out from under the tab. Rotate the lever 90 degrees upward.
Installing and removing system components
69
To Next Page
Loading...
