Option Description
• Power On
• Last Power State (Default setting)
Enable Intel Speed Shift
Technology
Allows you to enable or disable Intel Speed Shift Technology support. The option Enable Intel
Speed Shift Technology is set by Default setting.
Auto On Time Allows you to set the time at which the system must turn on automatically.
• Disabled (Default setting)
• Every Day
• Weekdays
• Select Days
Fan Control Override Allows you to control the speed of the system fan.
The option Fan Control Override is not enabled by Default setting.
USB Wake Support
Allows you to enable or disable the USB Wake Support.
• Disabled (Default setting)
• Enabled
Wake on LAN This option allows the system to power up from the off state when triggered by a special LAN
signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the
operating system. This feature only works when the system is connected to AC power supply.
• Disabled (Default setting)
• LAN Only
• LAN with PXE Boot
Table 10. POST behavior
Option Description
Numlock LED Allows you to specify if the NumLock function is enabled when the system boots. This option is
enabled by Default setting.
Keyboard Errors Specifies whether keyboard related errors are reported when it boots. This option is enabled by
Default setting.
Extend BIOS POST Time This option creates an additional pre-boot delay.
• 0 seconds (Default setting)
• 5 seconds
• 10 seconds
Warnings and Errors This option causes the boot process to only pause when warning or errors are detected. Choose
any one of the option:
• Prompt on Warnings and Errors (Default setting)
• Continue on Warnings
• Continue on Warnings and Errors
Table 11. Manageability
Option Description
Intel AMT Capability This option is selected as Enabled by Default setting.
USB provision This option is not selected by Default setting.
MEBx Hotkey This option is selected by Default setting.
22 Pre-operating system management applications
To Next Page
Loading...
