Dell EMC PowerEdge T40 - Supported operating systems; PSU specifications; System fan specifications; System battery specifications

Table 23. Processor Specifications
Supported processor Model UMA Graphics
Intel Xeon E E series Intel UHD Graphics P630
Intel Core i3 i3-9100 Intel UHD Graphics 630
Intel Pentium Gold G5400 Intel UHD Graphics 610
NOTE: Processor availability is subject to change and may vary by region/country.
Supported operating systems
The PowerEdge T40 supports the following operating systems:
• Microsoft Windows Server 2016
• Microsoft Windows Server 2019
• Ubuntu 18.04 LTS
NOTE:
For more information, go to www.dell.com/ossupport.
NOTE: For more information about the specific versions and additions, go to https://www.dell.com/support/home/
Drivers/SupportedOS/poweredge-T40.
PSU specifications
The PowerEdge T40 system supports one cabled AC power supply unit (PSU).
Table 24. PSU specifications
PSU Class Heat dissipation
(maximum)
Frequency Voltage Current
300 W AC Bronze 1024 BTU/hr
50 – 60 Hz
100 – 240 V AC,
autoranging
6A
NOTE: Heat dissipation is calculated by using the PSU wattage rating.
NOTE: The PowerEdge T40 system is also designed to connect to the IT power systems with a phase-to-phase voltage
not exceeding 240 V.
System fan specifications
The PowerEdge T40 system supports the following:
• One system cooling fan located at the top of the system.
• One processor cooling fan located on the heat sink.
NOTE:
When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system
power consumption with the Dell Energy Smart Solution Advisor available at Dell.com/ESSA.
System battery specifications
The PowerEdge T40 system supports CR 2032 3.0-V lithium coin cell system battery.
Expansion card specifications
The PowerEdge T40 system supports up to three PCI express (PCIe) Generation 3 and once PCI card.
82
Technical specifications