4. Click the Paper tab and select the paper source, size, and type.
5. Click OK and print the document.
The printer prints every other page of the document first. Once the first side of your job has
printed, the following window appears and blinks red.
6. Load the paper back into the printer with the already-printed side down and the top of the
page toward the front of the tray according to the instructions in the above window.
7. Press to print the other side of your job.
Fitting Your Document to a Selected Paper Size
You can scale your print job to any selected paper size, regardless of the digital
document size. This can be useful when you want to check fine details on a small
document.
1. To change the print settings from your software application, access printer
To Next Page
Loading...
