Dell 1110 - Laser Printer B/W - Guidelines for Using Paper

Letter
8.5 x 11 in.
(216 x 279 mm)
A4
8.3 x 11.7 in.
(210 x 297 mm)
Transparencies
Letter
8.5 x 11 in.
(216 x 279 mm)
138 to 146 g/m² bond
A4
8.3 x 11.7 in.
(210 x 297 mm)
Card Stocks
Post Card
4 x 6 in.
(101.6 x 152.4 mm)
90 to 163 g/m² bond
(16 to 43 lb) for manual
feed mode
Minimum Size
(custom)
3 x 5 in.
(76 x 127 mm)
60 to 120 g/m² bond
(16 to 32 lb) for manual
feed mode
Maximum Size
(Legal)
8.5 x 14 in.
(216 x 356 mm)
a. The printer supports a wide range of media sizes.
b. Capacity may vary depending on print materials' weight and thickness, and environmental
conditions.
NOTE: You may experience jams when using print materials with a length of less than 127 mm (5
inches). For optimum performance, ensure that you are storing and handling the paper correctly.
Please refer to "Printer and Paper Storage Environment".
Guidelines for Using Paper
For best results, use conventional 75 g/m² (20 lb) paper. Ensure that the paper is of good quality, and
free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.
If you are unsure of what type of paper you are loading, such as bond or recycled paper, check the
label on the package.
The following problems may cause print quality deviations, jamming, or even damage to the printer:
Symptom
Problem with Paper
Solution
Poor print quality or toner
adhesion, problems with
feeding
Too moist, too rough, too
smooth, or embossed; faulty
paper lot
Try another kind of paper,
between 100-400 Sheffield,
4%~5% moisture content.
Dropout, jamming, curl
Stored improperly
Store paper flat in its moisture-
proof wrapping.