Using Your Projector 91
Firmware Upgrade
Use the Firmware Upgrade page to update your projector’s wireless firmware.
NOTE: Please disable and enable wireless/network using the OSD to restart
the network card for the projector after firmware upgrade is successful.
To start the firmware update, follow these steps:
1
Press
Browse
to select the file to update.
2
Click the
Update
button to start. Wait while the system updates the firmware
in your device.
CAUTION: Do not interrupt the update process as this may cause the system to
crash!
3
Click
OK
when the update is complete.
To Next Page
Loading...
