Dell 966 - On the Scanner Glass

On the Scanner Glass
1. Open the top cover.
2. Place the document face down on the scanner glass.
NOTE: Make sure the upper left corner of the front of the item aligns with the arrow on the printer.
50 sheets of legal size paper
The document is loaded text side up.
The paper guide rests against the edge of the paper.
50 sheets of A4 size paper
The document is loaded text side up.
The paper guide rests against the edge of the paper.
50 sheets of two-, three-, or four-
hole pre-punched media
The paper fits within these dimensions: Width: 8.27 – 8.5 inches (210.0 –
215.9 mm) Length: 11.0 – 14.0 inches (279.4 – 355.6 mm)
The document is loaded text side up.
The paper guide rests against the edge of the paper.
50 sheets of edge-reinforced
three-hole copier media
The paper fits within these dimensions: Width: 8.27 – 8.5 inches (210.0 –
215.9 mm) Length: 11.0 – 14.0 inches (279.4 – 355.6 mm)
The document is loaded text side up.
The paper guide rests against the edge of the paper.
50 sheets of preprinted forms and
letterhead media
The paper fits within these dimensions: Width: 8.27 – 8.5 inches (210.0 –
215.9 mm) Length: 11.0 – 14.0 inches (279.4 – 355.6 mm)
The document is loaded text side up.
The paper guide rests against the edge of the paper.
You allow the preprinted media to dry thoroughly before use in the ADF.
You do not use media printed with metallic ink particles in the ADF.
You avoid embossed designs.
50 sheets of custom size paper
The paper fits within these dimensions: Width: 8.27 – 8.5 inches (210.0 –
215.9 mm) Length: 11.0 – 14.0 inches (279.4 – 355.6 mm)
The document is loaded text side up.
The paper guide rests against the edge of the paper.