30 | Setting up the monitor
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
NOTE: Do not connect all the cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The appearance of
the computer may vary.
To connect your monitor to the computer:
1. Turn o your computer.
2. Connect the DisplayPort/USB cable from your monitor to the computer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
Connecting the DP cable
DP
DP
Connecting the USB cable
USB
USB
To Next Page
Loading...
