About your monitor | 9
Back view
Label Description Use
1 VESA mounting holes (4)
(100 mm x 100 mm-behind
attached VESA cover)
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x 100
mm).
2 Regulatory label Lists the regulatory approvals.
3 Stand release button Releases stand from the monitor.
4 Headset hanger Hang the headset on hanger.
NOTE: Load bearing capacity under
400 g.
5 Cable-management slot Use to organize cables by inserting them
through the slot.
To Next Page
Loading...
