034
034
/
CHAPTER 8: CENTER CONTROL COVER
Turn the center control cover as shown in the illustration.7.
Release the connector latch to disconnect the cable from the center control 8.
cover connector.
Lift the center control cover o the computer.9.
1 center control cover 3 cable
2 connector latch
Turn the computer top side up, and open the display as far as it will open.5.
CAUTION: Be extremely careful when removing the center control cover.
e center control cover along with the cable that connects it to the
system board connector are very fragile.
Pry the center control cover up with a at-blade screwdriver until you 6.
see the cable that connects the center control cover to the system board
connector.
To Next Page
Loading...
