Dell™ Printer Configuration Web Tool 143
USB Direct Print Defaults
Purpose:
To create your own USB Direct Print Defaults setting.
Va lu es :
Printer Maintenance
The Printer Maintenance tab includes the Paper Density, Adjust Transfer Belt Unit, Adjust 2nd BTR, Adjust
Fusing Unit, Auto Registration Adjustment, Color Registration Adjustments, Reset Defaults, Initialize
PrintMeter, Storage, Non-Dell Toner, Adjust Altitude, Clock Settings, and Web Link Customization pages.
Paper Density
Purpose:
To specify the paper density.
Va lu es :
Adjust Transfer Belt Unit
Purpose:
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the previous page, or a part of
the page currently printing.)
Va lu es :
Adjust 2nd BTR
Purpose:
Expiration Time Sets the time to delete the files stored as Secure Print in the optional 512MB memory module or the
optional hard disk drive.
Recurrence Sets the period to repeat the setting.
Weekly Settings Sets the day of the week to repeat the setting.
Monthly Settings Sets the day of the month to repeat the setting.
Output Color Sets whether to print in color or in black and white.
Select Tray Sets the default input tray.
2 Sided Printing Sets whether to print on both sides of a sheet of paper.
Multiple-Up Sets whether to print two or more pages on one side of a sheet of paper.
Collation Sets whether to sort the output.
PDF Password Sets a password.
Re-enter PDF Password Confirms the set password.
Plain Sets the density of plain paper to Light or Normal.
Label Sets the density of labels to Light or Normal.
K Offset If faint black colored ghosts appear, try to decrease the value.
YMC Offset If faint ghosts in color (yellow, magenta, or cyan) appear, try to decrease the value.
To Next Page
Loading...
Need help?
General
