Dell™ Printer Configuration Web Tool 147
Print Server Reports
The Print Server Reports tab includes the Print Server Setup Page and the E-Mail Alert Setup Page.
Print Server Setup Page
Purpose:
To verify the current settings of TCP/IP (Transmission Control Protocol/Internet Protocol) protocol and printing
ports. On this page, you can only verify the settings of items. If you want to change the settings, go to the pages in
the Print Server Settings tab.
Va lu es :
Ethernet
*1
Ethernet Settings Displays the current settings of Ethernet transmission rate and the duplex
settings.
Current Ethernet
Settings
Displays the current Ethernet settings.
MAC Address Displays the Media Access Control (MAC) address of the printer.
Wireless Settings
*2
SSID Displays the name that identifies the network.
Network Type Displays the network type from either the Ad-Hoc or Infrastructure mode.
MAC Address Displays the MAC address of the wireless adapter.
Link Channel Displays the channel number of the connection.
Link Quality Displays the quality of the connection.
TCP/IP Settings IP Mode Displays the IP mode.
Host Name Displays the host name.
IPv4
*3
IP Address Mode Displays the IP address mode.
IP Address Displays the IP address.
Subnet Mask Displays the subnet mask.
Gateway Address Displays the gateway address.
IPv6
*4
Enable Stateless Address Displays whether to enable the stateless
address.
Use Manual Address Displays whether to set the IP address
manually.
Get IP Address from
DHCP
Displays whether to automatically set the IP
address via DHCP.
Manual Address
*5
Displays the IP address.
Stateless Address 1-3
*6
Displays the stateless addresses.
Stateful Address 1-3 Displays the stateful addresses.
Link Local Address
*6
Displays the link local address.
Manual Gateway
Address
*5
Displays the gateway address.
Auto Configure Gateway
Address
*6
Displays the gateway address.
To Next Page
Loading...
Need help?
General
