Understanding the Printer Menus 207
RAM Disk
NOTE: RAM Disk feature is available only when the optional 512 MB memory module is installed on the printer.
NOTE: RAM Disk feature is not available when the optional hard disk is installed.
Purpose:
To allocate memory to the RAM disk file system for the Secure Print, Private Mail Box Print, Public Mail Box Print,
and Proof Print features. The change becomes effective after the printer is turned off and then on again.
Va lu es :
NOTE: Restart your printer when you change the settings for the RAM Disk menu.
Substitute Tray
Purpose:
Specifies whether to use paper of a different size when the paper that is loaded in the specified tray does not match
the paper size settings for the current job.
Va lu es :
Set Available Time
Purpose:
Sets the available time for the Print function.
Va lu es :
NOTE: Set Available Time can be configured when Print is set to On.
Secure Job Expiration
NOTE: Secure Job Expiration feature is available only when RAM Disk is set to Enable or when the optional hard disk is
installed.
*1
This item is available only when the optional 550-sheet feeder is installed.
Off Does not allocate memory to the RAM disk file system. Secure Print, Private Mail Box Print,
Public Mail Box Print, and Proof Print jobs will abort and be recorded to the job log.
On 300 MB
*
Sets the allocation of memory to the RAM disk file system in increments of 50 MB.
Available Range:
50-450 MB
Off No tray size substitute accepted.
Larger Size Substitutes paper of next largest size. When there is no larger paper size, the printer substitutes paper of
nearest size.
Nearest Size
*
Substitutes paper of nearest size.
Use MPF Substitutes paper from the MPF.
Print Off
*
Does not set the time when printing is available.
On Sets the time when printing is available.
Start Time Sets the start time of the available time.
End Time Sets the end time of the available time.
Recurrence Sets the day of the week to repeat the setting.
To Next Page
Loading...
Need help?
General
