238 Loading Print Media
3
Slide the width guides to the edge of the tray. The width guides should be fully extended.
4
Insert all media facing up and top edge first into the MPF.
NOTE: Do not force the print media into the MPF.
5
Slide both width guides until they rest lightly against the edge of the print media stack.
NOTE: Do not force the print media into the MPF.
6
On the operator panel, press the or button until the desired paper size is highlighted, and then press the
(Set)
button.
7
Press the or button until the desired paper type is highlighted, and then press the
(Set)
button.
To Next Page
Loading...
