240 Understanding the Printer Menus
PostScript
Use the PostScript menu to change printer settings that only affect jobs using the PostScript emulation printer
language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose:
To specify whether the printer outputs error contents for a PostScript error.
The change becomes effective after the printer is turned off and then on again.
Va lu es :
NOTE: Instructions from the PS driver override the settings specified on the operator panel.
PS Job Time-out
Purpose:
To specify the execution time for one PostScript job. The change becomes effective after the printer is turned off
and then on again.
Va lu es :
Paper Select Mode
Purpose:
To specify the way to select the tray for PostScript mode. The change becomes effective after the printer is turned off
and then on again.
Va lu es :
Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used for a print job which does not specify a print mode.
Va lu es :
PDF
Use the PDF menu to change printer settings that only affect the PDF jobs.
Off Discards the print job without printing an error message.
On
*
Prints an error message before it discards the job.
Off
*
Job time-out does not occur.
On 1 minute
*
A PostScript error occurs if processing is not completed after the
specified time.
Available Range: 1-900 minutes
Auto
*
The tray is selected as the same setting as in the PCL mode.
Select from Tray The tray is selected in a method compatible with regular Post Script printers.
Color
*
Prints in the color mode.
Black Prints in the black and white mode.
To Next Page
Loading...
Need help?
General
