Understanding the Printer Menus 255
Va lu es :
Fax Broadcast
Purpose:
To set whether to print a transmission result after a fax transmission to multiple destinations.
Va lu es :
Fax Protocol
Purpose:
To set whether to print the protocol monitor report, which helps you identify the cause of a communication problem.
Va lu e s:
System Settings
Use System Settings to configure the power saving mode, warning tones, time-out duration, display language,
and job log auto print settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
General
Purpose:
To configure general settings for the printer.
Power Saver Timer
Purpose:
To specify the time for transition to power saver mode.
Va lu es :
Print Always Prints a transmission report after every fax transmission.
Print On Error
*
Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission.
Print Always
*
Prints a transmission report after every fax transmission.
Print On Error Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission to multiple destinations.
Print Always Prints a protocol monitor report after every fax transmission.
Print On Error Prints the protocol monitor report only when an error occurs.
Print Disable
*
Does not print the protocol monitor report.
Sleep 3 minutes
*
Specifies the time taken by the printer to enter Sleep mode after it
finishes a job.
Available Range: 1–60 minutes
Deep Sleep 5 minutes
*
Specifies the time taken by the printer to enter Deep Sleep mode after it
has entered Sleep mode.
Available Range: 1–60 minutes
To Next Page
Loading...
