Troubleshooting Guide 547
Images are skewed
Tray1/Optional 550-Sheet Feeder Misfeed Jam
4b Print the Color Regi Configuration Chart and manually correct the color
registration.
a Launch the
Tool Box
, and click
Service Tools
on the Printer
Maintenance tab.
b
Click
Start
under
Color Regi Chart
in
Color Registration
Adjustments
.
The Color Regi Configuration Chart is printed.
c
Identify the offset values from the chart and specify each value for
process, left, and right colors in
Enter Number
. See "Adjusting Color
Registration" for details.
d
Click
Apply New Settings
.
e Click
Start
under
Color Regi Chart
to print the Color Regi
Configuration Chart again.
Does this solve your problem?
The task is complete. Contact Dell.
Action Yes No
1 Adjust the paper guides properly.
Does this solve your problem?
The task is complete. Go to action 2.
2 Install the transfer belt unit according to an appropriate procedure. See
"Installing a Transfer Belt Unit."
Does this solve your problem?
The task is complete. Contact Dell.
Action Yes No
1 Ensure that tray1 or the optional 550-sheet feeder is properly inserted.
Does this solve your problem?
The task is complete. Proceed to the action
corresponding to the
type of the print media
being used:
•Thick - 2a
• Thin - 2b
•Coated - 2c
If using paper other
than the above, go to
action 2d.
Action Yes No
To Next Page
Loading...
