Setting up the monitor │ 19
Removing the monitor stand
NOTE: To prevent scratches on the LCD screen when removing the
stand, ensure that the monitor is placed on a soft, clean surface.
NOTE: The following instructions are applicable only for attaching the
stand that was shipped with your monitor. If you are attaching a stand
that you purchased from any other source, follow the set up
instructions that were included with the stand.
To remove the stand:
1. Pl
ace the monitor on a soft cloth or cushion.
2. R
elease the screw securing the stand assembly and the monitor.
3. Pull the stand assembly away from the monitor.
To Next Page
Loading...
