Removing the 2280 solid-state drive/Intel Optane memory
module
Prerequisites
NOTE: You need to disable the Intel Optane memory before removing Intel Optane memory module from your computer.
For more information about disabling the Intel Optane memory, see Disabling Intel Optane memory.
1.
Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following images indicate the location of the 2280 solid-state drive/Intel Optane memory module and provide a visual representation
of the removal procedure.
Steps
1. Remove the screw (M2x3) that secures the 2230 solid-state drive/Intel Optane memory to the system board.
2. Slide and lift the solid-state drive/Intel Optane memory from the M.2 card slot on the system board.
Installing the 2280 solid-state drive/Intel Optane memory
module
Prerequisites
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the 2280 solid-state drive/Intel Optane memory module and provides a visual representation
of the installation procedure.
Disassembly and reassembly
35
To Next Page
Loading...
