Option Description
• Thorough — The system does not skip any steps in the boot process.
• Auto — This allows the operating system to control this setting (this works only when the
operating system supports Simple Boot Flag).
This option is set to Thorough by default.
Extend BIOS POST Time This option creates an additional pre-boot delay.
• 0 seconds (default)
• 5 seconds
• 10 seconds
Full Screen Logo This option will display full screen logo if your image match screen resolution. The option Enable Full
Screen Logo is not set by default.
Warnings and Errors This option causes the boot process to only pause when warning or errors are detected. Choose any
one of the option:
• Prompt on Warnings and Errors (default)
• Continue on Warnings
• Continue on Warnings and Errors
Manageability
Table 12. Manageability
Option Description
Intel AMT Capability This option enables you to enable or disable Intel AMT capability. The options are:
• Disabled
• Enabled—enabled by default
• Restrict MEBx Access
USB provision This option is disabled by default.
MEBx Hotkey This option is enabled by default.
Virtualization support
Table 13. Virtualization Support
Option Description
Virtualization
This option specifies whether a Virtual Machine Monitor (VMM) can use the additional hardware
capabilities that are provided by the Intel Virtualization technology.
The option Enable Intel Virtualization Technology is enabled by default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from using the additional hardware
capabilities that are provided by the Intel Virtualization technology for direct I/O.
The option Enable VT for Direct I/O is enabled by default.
Trusted Execution
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can use the additional
hardware capabilities that are provided by Intel Trusted Execution Technology.
The option Trusted Execution is disabled by default.
System setup 75
To Next Page
Loading...
Need help?
General
