The power button shown in the picture is used when a system needs to be powered up
after a shut down using the system poweroff command. Once power is restored
the system power LED light turns blue.
Figure 4 Power button
1. System power LED — Blue light indicates system running
2. Power button
The LEDs in the front are shown in the following figure.
Figure 5
Front LEDs
1. SSD LED in slot 0
2. SSD LED in slot 1
3. SSD LED in slot 2
4. SSD LED in slot 3
5. System power LED — Blue light indicates system running
Hardware Overview
20 Data Domain DD9500 and DD9800 Systems 6.1 Hardware Overview and Installation Guide
To Next Page
Loading...
