Table 4 Front panel LED status indicators
Part Description or Location State
System, SP fault Exclamation point within a
triangle
Dark indicates normal
operation. Amber indicates
failure.
System, chassis fault Exclamation point within a
triangle
Dark indicates normal
operation. Amber indicates a
fault condition.
SSD Top LED Solid blue, disk ready, blinks
while busy.
SSD Bottom LED Dark indicates healthy. Solid
amber indicates disk fail.
Solid State Drives (SSD)
A system contains 4 hot-swappable 2.5 in. 400 GB SSD drives located in the front.
There are four drive bays numbered 0-3 from left to right. A dual drive failure allows
the DD9500/DD9800 system to operate without disruption.
Each drive has a blue colored power LED and an amber fault LED.
Figure 6
SSD drives
1. Slot 0
2. Slot 1
3. Slot 2
4. Slot 3
Hardware Overview
Solid State Drives (SSD) 21