d. Attach the rear of the rail/bracket assembly to the rear of the rack. Secure
each screw.
Figure 27 Attach front rail adapter
9. Repeat the steps for the second rail.
10. After installing both rails, make sure that they are level with one another.
11. For HA systems, repeat this procedure for the second node.
Install the DD9500/DD9800 system into a rack
Data Domain systems are heavy. Always use two people or a mechanical lift to
move a system. The chassis displays warning signs.
Figure 28 Warning about lifting the system
Install the System in the Rack
Install the DD9500/DD9800 system into a rack 45
To Next Page
Loading...
