Figure 48. Installing the expansion card riser 3
1. riser guide-front 2. power connector (for GPU cards)
3. expansion card riser 3 4. riser guide-back
5. expansion card riser 3 connector
Next steps
1. Install the expansion card(s) into the expansion card risers 2 or 3.
2. Follow the procedure listed in the After working inside your system section.
3. Install any device drivers required for the card as described in the documentation for the card.
GUID-0CBC7747-E59B-4278-90A7-C44C79218332
Internal dual SD module (optional)
The Internal Dual SD module (IDSDM) provides you with a redundant SD card solution. You can configure
the IDSDM for storage or as the OS boot partition. The IDSDM card offers the following features:
• Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and
provides redundancy.
NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of
System Setup, the information is replicated from one SD card to another.
• Single card operation — single card operation is supported, but without redundancy.
119
To Next Page
Loading...
