Dell DR4300 - Quick Sync Indicator Codes

Table 7. iDRAC Direct LED indicators
Convention iDRAC Direct
LED indicator
pattern
Condition
A Green Turns green for a minimum of two seconds to indicate the start and
end of a file transfer.
B Flashing green Indicates file transfer or any operation tasks.
C Green and turns
off
Indicates that the file transfer is complete.
D Not lit Indicates that the USB is ready to be removed or that a task is
complete.
The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop
and cable (Laptop Connect):
Table 8. iDRAC Direct LED indicator patterns
iDRAC Direct LED
indicator pattern
Condition
Solid green for two
seconds
Indicates that the laptop is connected.
Flashing green (on
for two seconds and
off for two seconds)
Indicates that the laptop connected is recognized.
Turns off Indicates that the laptop is unplugged.
GUID-E6AEA86E-2362-4E9A-BCF2-1167A370E966
Quick Sync indicator codes
Figure 7. Quick Sync
1. Quick Sync Status Indicator 2. Quick Sync Activation Button
17