Dell DR4300 - Installing the Control Panel

Figure 82. Removing the control panel
1. screw (3) 2. control panel
3. hard-drive backplane 4. connector
5. plastic pull tab
Next steps
1. Replace the control panel.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Installing the control panel
After working inside your system
GUID-34B561A0-959C-4B0B-A688-3D3873F2A0D0
Installing the control panel
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the T15 Torx screwdriver handy.
165