Dell DR4300 - Embedded System Management; Boot Manager; Viewing Boot Manager; Boot Manager Main Menu

GUID-59438B5D-182F-4C94-8866-83903AF71AC2
Embedded system management
The Dell Lifecycle Controller provides advanced embedded systems management throughout the
system’s lifecycle. The Dell Lifecycle Controller can be started during the boot sequence and can
function independently of the operating system.
NOTE: Certain platform configurations may not support the full set of features provided by the Dell
Lifecycle Controller.
For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware,
and deploying the operating system, see the Dell Lifecycle Controller documentation at Dell.com/
idracmanuals.
Related Links
Dell Lifecycle Controller
GUID-D62AC4EB-E0AF-48F5-8F92-54F0371E005F
Boot Manager
The Boot Manager screen enables you to select boot options and diagnostic utilities.
Related Links
Boot Manager main menu
System BIOS
Viewing Boot Manager
GUID-9A03D297-C202-4104-9623-7DB4EB128468
Viewing Boot Manager
To enter Boot Manager:
1. Turn on, or restart your system.
2. Press F11 when you see the following message:
F11 = Boot Manager
If your operating system begins to load before you press F11, allow the system to complete the
booting, and then restart your system and try again.
Related Links
Boot Manager
Boot Manager main menu
GUID-4F3E3CE5-39AC-4CF6-B32D-A7671063B1D5
Boot Manager main menu
Menu item
Description
Continue Normal
Boot
The system attempts to boot to devices starting with the first item in the boot
order. If the boot attempt fails, the system continues with the next item in the boot
order until the boot is successful or no more boot options are found.
59