Dell DR4300 - Installing the Optional Hard Drive Backplane (Rear)

Figure 76. Removing the optional 2.5 inch (x2) hard drive backplane
1. SAS cable 2. release pin
3. hard drive connector (2) 4. power cable
5. backplane signal cable
Related Links
Safety instructions
Before working inside your system
Removing a hot swappable hard drive or SSD
After working inside your system
GUID-CF5A942B-4BF7-4D9F-A365-277C25B24D92
Installing the optional hard drive backplane (rear)
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
158