Dell DR4300 - Installing a 3.5-Inch Hard Drive Blank

Figure 67. Removing a 3.5-inch hard drive blank
1. hard drive blank 2. release button
Next steps
If applicable, install the front bezel.
Related Links
Safety instructions
Removing the optional front bezel
Installing the optional front bezel
GUID-5EE8C88A-E7DE-483A-98D2-5F96AE00CC47
Installing a 3.5-inch hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 68. Installing a 3.5-inch hard drive blank
1. hard drive blank
Next steps
If applicable, install the front bezel.
147