Dell DR4300 - Page 56

Option Description
Number of Turbo
Boot Enabled
Cores for
Processor 1
NOTE: If there are two processors installed in the system, you see an entry for
Number of Turbo Boost Enabled Cores for Processor 2.
Controls the number of turbo boost enabled cores for processor 1. The maximum
number of cores is enabled by default.
Monitor/Mwait Enables the Monitor/Mwait instructions in the processor. This option is set to
Enabled for all system profiles, except Custom by default.
NOTE: This option can be disabled only if the C States option in the Custom
mode is set to disabled.
NOTE: When C States is set to Enabled in the Custom mode, changing the
Monitor/Mwait setting does not impact the system power or performance.
Related Links
System Profile Settings
Viewing System Profile Settings
GUID-39ED4430-3C7E-4E1A-BBDA-3B0C354FD9B1
Miscellaneous Settings
You can use the Miscellaneous Settings screen to perform specific functions such as updating the asset
tag and changing the system date and time.
Related Links
Miscellaneous Settings details
System BIOS
Viewing Miscellaneous Settings
GUID-F1DD6C36-AEB2-495B-9FDB-70E29BE86DCE
Viewing Miscellaneous Settings
To view the Miscellaneous Settings screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish
booting, and then restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Miscellaneous Settings.
Related Links
Miscellaneous Settings
Miscellaneous Settings details
GUID-982AD1EF-9ED6-457F-8E44-AF6A9717AABD
Miscellaneous Settings details
The Miscellaneous Settings screen details are explained as follows:
Option
Description
System Time Enables you to set the time on the system.
56