30 Setting Up the Monitor
Menu and Submenus Description
Dynamic Contrast adjusts the contrast ratio to
8,000,000 : 1.
Dynamic Contrast
Push the
button to select the Dynamic Contrast “On”
or “O”.
Reset Display
Restores the display settings to factory defaults.
Settings
Energy Settings
Energy Smart
Turn-on or turn-off dynamic dimming.
Energy Smart turned “on” will activate the dynamic
dimming. With Energy Smart turned on, the monitor will
consume overall less power compared to when Energy
Smart is turned “off”.
NOTE: Under Energy Smart mode, the energy usage bar
will decrease when transitioning from bright scenes to
darker scenes. The energy usage bar will increase when
transitioning from dark scenes to bright scenes.
System
Monitor status On Standby Off
Monitor with
On On Off
upstream
(Disabled) (Disabled) (Disabled)
USB
connected
Off/On*
Monitor without
(depends
upstream On
Off
on OSD
connected
selections)
Allows you to set the state of the power light to save
Power Button LED
energy.
Reset Energy Settings Restores the energy settings to factory defaults.