Figure 5. Removing and installing the system cover
1. slots 2. tabs
3. cover release latch 4. system cover
Next steps
1. Install the system cover.
2. Place the system upright on its feet on a flat and stable surface.
3. Reconnect the peripherals and connect the system to the electrical outlet.
4. Turn the system on, including any attached peripherals.
Related Tasks
Installing the system cover
Installing the system cover
Prerequisites
1. Ensure that you follow the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Ensure that all internal cables are connected and placed out of the way and that no tools or extra
parts are left inside the system.
Steps
1. Align the tabs on the system cover with the corresponding slots on the system chassis.
2. Lower the system cover onto the chassis until it clicks into place.
40
To Next Page
Loading...
