4. Turn on the system, including any attached peripherals.
Related Tasks
Installing the system cover
Recommended tools
You need the following tools to perform the installation and removal procedures:
• Phillips #2 screwdriver
• Plastic scribe
• Wrist grounding strap connected to ground
System cover
Removing the system cover
Prerequisites
1. Ensure that you follow the Safety instructions.
2. Turn off the system and any attached peripherals.
3. Disconnect the system from the electrical outlet and disconnect the peripherals.
4. Lay the system on its side.
Steps
Lift the cover release latch and remove the cover away from the system.
39
To Next Page
Loading...
