Figure 12. Removing and installing hard drive carrier from the hard drive bay
1. hard drive 2. retention clips on hard drive carrier (2)
3. hard drive power and data cables (2)
Next steps
1. Install the hard drive carrier into the hard drive bay.
2. If disconnected, connect the power and data cables to the hard drives in the hard drive bay.
3. Follow the procedure listed in After working inside your system.
Related Tasks
Installing a hard drive carrier into the hard drive bay
Installing a hard drive carrier into the hard drive bay
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
53
To Next Page
Loading...
